The ability to mount the gateway on both walls and ceilings ensures that you can choose the most appropriate location for the gateway, optimizing access control coverage and enhancing the security depending on the layout of the facility

Gateway Mounting Instructions (Using Gib & Screws)

1. Mark the Mounting Points
   Place the gateway on the wall and mark the screw hole positions.
2. Drill the Holes
   Drill holes at the marked points using an appropriate drill bit.
3. Insert Gibs (Wall Plugs)
   Insert the wall plugs into the drilled holes until they are flush with the wall.
4. Fix the Screws
   Tighten the screws into the wall plugs, leaving a small gap.
5. Mount the Gateway
   Align the gateway with the screws, secure it firmly, and connect the power adaptor.