The Spintly Partner app allows you to configure the devices added. The app takes the same credential as the partner website to log in. To do the configuration, the app connects with the installed devices over Bluetooth to set up its mesh network.

The app can be downloaded from play store https://play.google.com/store/apps/details?id=com.spintly.partnerV2.prod

• Download the Spintly partner app from the link and log in with the same credential as the partner web portal. Once logged in, you are ready to configure the devices using the Partner app.
• Keep the devices powered on and follow the next steps

4.1 Update Firmware

To Update the Firmware of access point/Mesh IO

Select Access points/Mesh IO >> Click on view details >>Click update Firmware button>>Select Latest Firmware Version and click on confirm.

Firmware Update will start on the device. Make sure that you don’t close the app or phone during this operation.

4.2 Configuring the Spintly devices

To configure the added devices, click on the organization name you just created and you will get a page as shown below.

To Configure the Gateway under the same organisation,

Select Gateways >> Click on View Info >> Click Configure Device button below the serial number.

To configure the access point

Select Access points >> click on view details>> Click Configure button.

• After the completion of configuration, it will show as configured.

4.3 Device Reset Process :

Select Access point >> Click on view details >>Click on Reset.

• After resetting the device will be removed from this organisation with all the data and we can add the device now to another organisation.

4.4 Configuring The Mesh I/O

• Click on the mesh I-O you want to Configure .                                                                                                        
• Click on View

• Click on the Configure Device .
• Click Start configuration .

4.5 Card Enrollment process:

• To enroll the Card click on the organization name you want to enroll the Card. Click on Credentials from bottom right corner. Refer to the below screenshots.
• Click on the Enroll Card button >> Click Start Enrollment >> Click Scan Reader 
• Select the Reader which you added in the organization >> place Card on the device.
• After placing the Card on the Reader it will show as Card Enroll Successfully .

4.6 Card Unenrollment process:

• To Unenroll the Card click on the organization >> Click on Credentials from bottom right corner
• Click on Unenroll Card button >> Click Start Unenrollment >> Click Scan Reader
• Select the Reader >> Place Card on the Device.
• After placing the Card on the Reader it will show as Card Unenroll Successfully.

Now you have completed the customer account creation and adding devices to the account. You can now use SAAMS software for further customer account settings. Please check the SAAMS software manual or refer to helpjuice site to know more.

https://spintly.helpjuice.com/en_US/software-guides

For any other queries please reach out to support@spintly.com or deployment@spintly.com or dial on toll free number +91 18003090602