1. The fire panel vendor must provide a dry contact I/O output (NO and Common) from the fire panel. These wires should be connected to the corresponding input terminals of the Spintly Mesh-IO device. When the fire panel is triggered, the Mesh-IO will send an open signal to the reader, keeping the doors unlocked until the fire panel is reset.

2. A 230V power socket must be installed near the fire panel I/O output to power the Mesh-IO device. The fire panel I/O output and the power socket should be located close to each other and within 100 meters of the Spintly access control devices.

For any other queries please reach out to support@spintly.com or deployment@spintly.com or dial on toll free number +91-18003090602