Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Overview
  • FAQs
  • Software Guides
  • Hardware Guide
  • Integration
  • Technical Blogs

Categories

  • Overview
  • FAQs
  • Software Guides
  • Hardware Guide
  • Integration
  • Technical Blogs
Home / FAQs / Partner Queries / Partner Queries

How do I connect the gateway to Wifi?

Categories

Overview FAQs Software Guides Hardware Guide Integration Technical Blogs

How do I connect the gateway to Wifi?

How to power on the gateway

1. Connect the included power adaptor to the gateway via the DC jack.

2. Plug the adaptor into the wall socket 

3. The status LED should be stable red, indicating it's powered on, and the gateway is turning on now. 

Note: If you have a PoE-enabled gateway model, then you can power the gateway just with the PoE ethernet cable. There is no need to plug in the power adaptor separately. 

 

How to configure the gateway to your Wi-Fi network. 

Note down the SSID {name of your Wi-Fi network) and password of your home Wi-Fi network before you proceed. 

1. Power on the Fi-B Gateway

  • Once the power is connected, the status LED will turn red, indicating the gateway is turning ON. 
  • After the gateway is fully turned on and if the gateway was not configured to any Wi-Fi network, then the status LED and Wi-Fi LED will blink Purple

2) Put the gateway in configuration mode 

  • Keep the configure button pressed for approximately 10 seconds and release it after the status LED turns solid red. 
  • Now, wait around 45 seconds for the gateway to come into access point mode. This will be indicated by the status LED blinking red, and all other LEDs turning off

3) Connect to the gateway over Wi-Fi to configure it 

  • Open your laptop or phone while and connect to the Spintly gateway. The default Fi-B Gateway access point name and password are given below

               Gateway name = spintly-gateway 

               Password= spintly#321$ 

  • Once you are connected to the gateway, go to your web browser. 
  • Type the URL below in the address field of your browser. 

               http:/1192.168.1.1 or http://spintly-gateway.local

4) Connect the gateway to your desired Wi-Fi network. 

  • Once the configuration page opens, click on your available Wi-Fi network to configure this gateway to that network. 
  • Click Refresh Wi-Fi networks, if you cannot see WiFi networks.
  • Click on your desired Wi-Fi network and enter the password. Click on apply. 
  • You will get a message Gateway has been configured for the new Wi-Fi network. Click on the OK button.
  • Click on restart Gateway. This will restart the gateway 
  • If you enter the correct password, the gateway will connect to your Wi-Fi after reboot, and the status LED should turn blue, indicating that the Gateway is connected to Wi-Fi.

LED Status Indicator ( when it is configured using Wi-Fi): To check the status of the gateway, you can check the status LEDs on its front.

LED LED Color Description
1. Status LED Red Power On
  Blue Connected to cloud
  Purple Wi-Fi configured but not connected to cloud
  Blinking Purple Wi-Fi not configured
  Blinking Red Access point mode
  Blinking Blue Wi-Fi connected but not connected to cloud
2. Wi-Fi LED Blue Strong Wi-Fi Strength
  Purple Medium Wi-Fi Strength
  Red Weak Wi-Fi Strength
  Blinking Purple Wi-Fi not configured
  Blinking Blue Ethernet connected
  Off Wi-Fi disconnected
3. BLE LED Blue Bluetooth active
  Off Bluetooth not active

 

gateway setup wifi connection

Was this article helpful?

Yes
No
Give feedback about this article

Related Articles

  • How do I reset wi-fi settings on my Spintly Gateway?
  • How do I enable/ disable remote access for a user?
  • How do I enroll cards?
Spintly

Industries

  • Multifamily / Residential
  • Co-Working
  • Education
  • Healthcare
  • Hospitality
  • Manufacturing
  • Fitness & Wellness

Solutions

  • Access Control
  • Visitor Management
  • Tenant Management
  • Time & Attendance Management

About

  • About Us
  • Partners
  • FAQ
  • Privacy Policy
  • Terms & Conditions

Resources

  • Case Studies
  • Blogs
  • Whitepapers
  • Webinars
  • Press
  • Data Sheets

Contact Us

  • Sales: sales@spintly.com
  • Tech Support: support@spintly.com
  • Get a Quote
© 2024 Spintly. All Rights Reserved. | 691 S Milpitas Blvd, Ste 217 Milpitas, CA 95035
Expand